ATI’s Business Analyst Nikul Bhadasia and Strategy Intern Lukas Alemu round up the successful supplier event held recently.

The ATI held a joint E-Fan X Supplier event with Airbus at the AIRC (Aerospace Integration Research Centre) at Cranfield University on 17th July 2019. It was attended by approximately 120 people from over 80 different companies and academic institutions. It was a great opportunity for companies to learn more about the E-Fan X programme, discuss opportunities to work with Airbus and to network with others involved on the electrification journey.


Sarabpal Bhatia, E-Fan X R&T Co-ordinator

Sarabpal Bhatia, E-Fan X R&T Co-ordinator, Airbus, introduced the E-Fan X programme and an overview of the ATI’s funding support mechanisms was given by Tommy Edgar, ATI’s Strategic Portfolio Manager. Attendees were then able to network and engage in B2B discussions.

We created an interactive marketplace which covered four categories: Thermal Management & Cooling Installation, Batteries & Systems, Electrical Installation and Jigs & Tooling, which invited companies to discuss the challenges for electrification, potential solutions and reflect on where their capabilities fitted into the journey towards electrification.

ATI’s Head of Technology Mark Scully engaging with attendees at the marketplace

It was also an opportunity for attendees to engage with our team from the ATI regarding opportunities to get involved in the ATI Programme. After the event we were delighted to join the E-Fan X team for a tour around the demonstrator aircraft and hangar.

Projects like E-Fan X are pushing the boundaries of UK aerospace technology. Airbus’s hybridisation technology demonstrator is an important step forward in developing greener passenger aircraft, and it was great to see the excellent progress being made in the ATI-funded project. The ATI has a keen focus on sustainability-driven R&D – around 50% of our portfolio is in this area of technology development.

We are excited to see the future of hybrid aircraft being developed at Airbus and look forward to this and other projects in our portfolio advancing carbon-conscious aerospace development in the UK.


ATI’s Scott Pendry highlights some of the ATI’s views contained in the Institute’s recent response to the DfT Aviation 2050 green paper.

The DfT’s consultation on the future of aviation comes at an exciting time and we welcomed the paper. Arguably right now is an inflection point for air transport, a period when aviation is poised to go through the biggest change in fifty years as a result of aircraft designs and operating concepts enabled by new technologies including electric propulsion and the increased use of automation.  As a result of these changes, existing aircraft will not only become more efficient but new markets will be created, such as low-cost regional routes and urban/city air routes, which will take advantage of new aircraft designs.  It’s a hugely exciting time for aerospace – not only will these innovations improve connectivity, they will be enabled by technologies that are environmentally sustainable and, as my colleague Simon Weeks wrote recently, could benefit from significant ATI funding for improved environmental performance.

Given our role in establishing the Future Flight Challenge, our response talked extensively about the transformative impact the Challenge will have in considering, and ultimately developing, the infrastructure, policy and regulation required to incorporate new forms of electric, autonomous and unmanned aviation into the air transport system.  However, the consultation also gave us a few concerns – if we, the UK, really want to have a long-term aviation strategy out to 2050, we need to consider the infrastructure required to enable future air transport concepts and intermodality, concepts that will underpin the operation and commercial feasibility of new forms of air transport.

The key role of infrastructure

Connectivity is crucial to promoting regional growth and increased productivity, but new routes and markets won’t be created without the physical infrastructure required to enable new vehicles to take-off and land (either vertically or horizontally), charge and wait for passengers.

With the pace of electric aircraft development increasing, the Aviation 2050 Strategy needs to ensure that infrastructure development is in step with technology development, as failure to do so could stifle the development of new air transport operations in the UK.

For urban air mobility VTOL aircraft, a distributed network of ‘vertiports’ or ‘skyports’ (VTOL hubs with multiple take-off and landing pads, as well as charging infrastructure) or single-aircraft vertistops (a single VTOL pad with minimal infrastructure) is essential. Likewise, for conventional take-off and landing aircraft, a network of small airports and airfields, complete with suitable charging infrastructure and maintenance facilities is an absolute necessity.

A further infrastructure consideration is the provision of 5G communication networks which will allow the precise navigation that is needed for new aerial vehicles, many of which will be operated autonomously.

Intermodality – aviation should be an integral part of the future transport mix

New aircraft will only become a useful component of tomorrow’s mobility if they are integrated into the overall transport network of cities and regions – new urban and regional aircraft should be thought of within the context of multi-modal transport solutions.

It’s therefore important that the final Aviation 2050 paper recognises that new skyports and smaller airports/airfields should also be treated as connectivity hubs, ready for multimodal journeys to and from destinations which might also involve a pooled car, bus or rail journey at either end.

Electrification and automation – a growing focus of the ATI

We’re working with established organisations in the sector, as well as more disruptive companies from outside the sector, to identify new projects which will position the UK as a world leader in the development of electric and autonomous aircraft. The E-Fan X is one of our most high-profile projects and, thanks to the Paris Airshow, is now gaining a significant amount of media attention.

There are many more projects like E-Fan X that we are keen to support and we want to work with companies of all sizes who have innovative ideas that will keep the UK competitive.

To read the ATI’s response to the DfT in full, please click here.

Our thanks to Dr Simon Weeks, Chief Technology Officer of the Institute, for this blog.

The ATI was delighted to see the recent joint commitment of seven CTOs from the world’s largest commercial aviation manufacturers to work to reduce the net CO2 emissions from aviation. They are on the way to meet the near-term targets set out by the Air Transport Action Group (ATAG) and the International Civil Aviation Organisation (ICAO) Carbon Offsetting and Reduction Scheme for Aviation (CORSIA). Having played a leading role in the definition of the broader EU Flightpath 2050 environmental impact goals in 2011, I was also really pleased to see their renewed commitment to those too. At the Paris Air Show, where the announcement was made, I had the opportunity to meet with some of these industry leaders and hear their intent directly.

One of the major themes of the ATI’s UK aerospace technology strategy and associated technology programmes, including the Future Flight Challenge, is improved environmental performance; around half of the ATI Programme investment is directly concerned with this. In the UK, our leading technological capabilities in wings, propulsion and systems will make a large contribution to improving environmental performance in the coming years. With the UK government’s commitment for zero net carbon by 2050, the ATI is working with industry and academia to develop a route map for aviation’s contribution.

For wings, we see opportunities to improve the overall fuel efficiency and hence CO2 emissions of aircraft by reducing aerodynamic drag and ‘lightweighting’ using advanced composites. Lightweight composite structures technologies will enable airframers to produce longer, thinner wings for better aerodynamic efficiency. Research on ways to actively enhance laminar low drag flow across wings is already well advanced. Ultimately, we would like to enable structures to reshape themselves, morphing through a flight to further optimise aerodynamics.

On jet engines, ultra-high bypass engine technologies will improve propulsive, aerodynamic and thermodynamic efficiencies, reducing fuel consumption. In the future, electrification of propulsion offers the prospect of simultaneous production of thrust alongside enhancing airframe aerodynamics.

Work on aircraft systems technologies is aimed at making them ever more energy efficient and lighter. Software defined systems will reduce the number and weight of avionics units in an aircraft. Systems will progressively become all-electric, improving the aircraft energy efficiency.

Electrified propulsion, hybrid for longer ranges and all-electric for shorter ranges is heralding in the so-called ‘third age’ of aviation, with the prospect of new markets for urban and sub-regional aviation. With the right integration of technologies at the air vehicle level, there is the real prospect of zero net carbon flight from the outset for these exciting developments.

Achieving zero net carbon flight will need technologies on aircraft and across other areas that impact the carbon emissions from the aviation industry. New sustainable manufacturing technologies will reduce factory carbon emissions and require dramatically less raw materials. We will need to make the flight patterns of aircraft shorter and more energy-efficient through the development and application of new ways of managing air traffic. Technologies for low-carbon impact drop-in fuels – both bio-derived and synthetic – need to be accelerated. Electrified aviation will need zero net carbon electricity from land-based power generation. The UK is world leading in these areas and hence has every opportunity to make progress on both national and international stages.

Going forward, the ATI will be regularly highlighting the progress being made on aviation’s journey to lower environmental impact. If you have any ideas of areas where we could be doing more to help, please let me know!

Photo: © Airbus

The Aerospace Technology Institute (ATI) and Innovair, the Swedish programme for aeronautics, together with delivery partners Innovate UK and Vinnova, have today announced the award of four projects that are being funded under a joint aerospace funding call between the UK and Sweden.

The call, operated under the EUREKA Network Projects programme, was developed to foster industry-led collaborative R&D projects between the UK and Sweden to advance both countries’ aerospace industries. UK organisations were given the opportunity to apply for a share of up to £2.25 million to develop aerospace technology in partnership with Swedish companies.

The success of the call was announced at the EUREKA Global Innovation Summit being hosted in Manchester (14th-16th May 2019).

The projects selected will conduct research with strong market potential for the UK and Sweden and, guided by the respective aerospace strategies of the UK and Sweden, cover a range of technology areas, including materials, propulsion and systems.

Two such projects focus on high temperature electronics and the analysis of complex sensors and electric components in aircraft.

With aircraft using ever-greater electrical applications, there is a growing need for new high-temperature electronics and the project, focusing on new transistor devices, will pave the way for more electric applications in aircraft. The benefits of more electrical applications are numerous, including reduced weight, greater reliability, lower maintenance costs and increased efficiency. The project is led by Rolls-Royce and is supported by Ascatron AB and other organisations from Sweden.

The sensors and electrical analysis project, led by ESI Group in Sweden and with International Technegroup as UK partners, will look at electromagnetic interference with aircraft systems. A better understanding will enable more complex sensors to be fitted to aircraft, improving the operation of the aircraft and the passenger experience by increasing connectivity.

Commenting on the call, the UK’s Ambassador to Sweden, His Excellency David Cairns said:

For two countries such as Britain and Sweden our economic development depends on high-quality research, innovation, technology, development, and collaboration, and in perhaps no sector is this more important than aerospace. Through this joint funding call both our countries will close gaps in capability, gain access to new partners, bolster existing capability, and encourage greater levels of trade and investment between both our countries.

Simon Edmonds, Deputy Executive Chair and Chief Business Officer, Innovate UK, said:

As the UK prepares to welcome international businesses and innovation agencies to the EUREKA Global Innovation Summit, Innovate UK, alongside BEIS and the ATI, is proud to be supporting these projects funded through the EUREKA Network Project Call in Aerospace 2018, with Sweden. They demonstrate the vital role that that collaboration with the global supply chain plays in supporting the success of the UK Aerospace industry.

Malcolm Scott, Corporate Development Officer at the ATI, said:

Over the last few years we have shared our respective aerospace strategies, identified areas for mutual collaboration and have taken time to build the case for a joint R&D funding call. We are delighted to be able to award funding to these projects, which will facilitate new relationships and close capability gaps in both the UK and Sweden and we hope to strengthen ties with Swedish colleagues by holding a further call in 2020.

Director General of the Swedish Innovation Agency Vinnova, Darja Isaksson said:

To stay competitive within aeronautics you have to collaborate with the best nations to reach excellence in engineering. The long-term benefit of this funding call will be to accelerate the development of aerospace technology by working together and it is very important to do so in light of pressing environmental concerns.